Maintenance of engineering vehicles is the key to ensure their normal operation and extend their service life. The following are the main contents and steps of maintenance of engineering vehicles:
Maintenance content
Engine maintenance: Regularly replace the engine oil and oil filter, and check the engine coolant, fuel system and intake system. The oil change cycle is usually every 500 hours, and the oil filter element must be replaced at the same time as the engine oil.
Fuel system maintenance: Clean the fuel coarse filter and fine filter to ensure the normal operation of the fuel system.
Intake system maintenance: Clean the air filter to keep the intake system clean.
Cooling system maintenance: Regularly add coolant, clean the radiator, and ensure the normal operation of the cooling system.
Transmission system maintenance: Check the drive shaft, universal joint and other components to ensure that the transmission system is well lubricated.
Braking system maintenance: Check the brake pads, brake discs and brake fluid to ensure the normal operation of the brake system.
Steering system maintenance: Check the steering power pump, steering gear and other components to ensure the normal operation of the steering system.
Body and chassis maintenance: Check the appearance of the body, tire pressure and wear, keep the body clean and prevent corrosion.
Maintenance cycle and standards Daily inspection: Check the oil level before starting every day, pay attention to the working status of each component during driving, and deal with abnormal conditions in time. Regular inspection: Replace the engine oil and oil filter every 100 hours, and replace the lubricating oil and oil filter every 1500 hours. Periodic inspection: Perform a comprehensive inspection once a month, record the maintenance process and results, and deal with the problems found in time.
The importance of maintenance Ensure the normal operation of equipment: Regular maintenance can detect and deal with potential problems in time, prevent equipment failure, and ensure that the engineering vehicle is always in good condition. Extend service life: Through reasonable maintenance, equipment wear can be reduced, its service life can be extended, and maintenance costs can be reduced. Improve work efficiency: Keeping equipment in good condition can improve construction efficiency and reduce downtime caused by equipment failure.
