Insulated Boom Trucks utilize a combination of insulated booms, insulated work buckets, and electro-hydraulic control systems to enable personnel to approach electrical installations and perform aerial work within specified voltage levels.

Core Advantages

Absolute Insulation

Utilizing a fully insulated boom structure with a three-section telescopic boom and an insulated small articulated boom, and equipped with an insulated inner-lined work bucket, the rated insulation voltage is 45kV, suitable for live or near-electric work conditions.

Superior Coverage Capacity
The boom supports luffing and slewing movements, with a continuous 360° slewing angle. Combined with auxiliary lifting functions, it can cover multiple high-altitude work points in multiple directions, reducing the need for frequent vehicle repositioning.

High Control Precision
Equipped with an electro-hydraulic proportional control system, the operating speed can be continuously adjusted according to the input signal, meeting the needs of personnel for precise displacement when positioning at heights or approaching work points.

High Load Capacity
With a 2.5-ton front axle and a 4.8-ton rear axle load capacity, coupled with 7.00R16 reinforced engineering tires, it is suitable for travel and support on construction sites and unpaved roads.

Safety
The master-slave hydraulic automatic leveling system keeps the work bucket level during boom luffing and is equipped with multiple anti-reverse, anti-tipping, and emergency electric hydraulic pumps.

Application Scenarios

Power Operation and Maintenance: Used for high-voltage lines, substation equipment, and live-line work, enabling personnel access and maintenance within specified voltage levels using insulated booms and work platforms.
Municipal Engineering: Utilizing boom extension and work platform positioning for high-level installation and maintenance in street lighting, bridge construction, and landscaping trimming.
Communication Facility Maintenance: Used for 5G base station and overhead fiber optic line construction, supporting equipment installation and line adjustments through high-altitude positioning.
Emergency Repair and Rescue: Rapidly deploying outriggers and booms in post-disaster or sudden equipment failure situations to achieve high-altitude maintenance or personnel access.
Construction Site Operations: Suitable for high-altitude construction of exterior walls, steel structures, and fire protection facilities, using a platform to carry personnel and tools for fixed-point operations.

Insulated Aerial Work Platform Trucks Configuration Parameters

Design Specification
Chassis brand:	Isuzu KV 100	Cab model:		Cab: KV100 wide body
Wheelbase:	3815mm
Engine:	Isuzu 4KB1-TCG60 130HP/2.5L
Gearbox:	Isuzu 5-speed gearbox
Tire:	7.00R16; reinforced engineering tire
Vehicle size:	7270×2080×3100(mm)	Total mass:	7145kg
Insulation voltage:	45KV	Rated load:	220kg; Insulated bucket lining
Upper body configuration
Rotation angle: 360° continuous rotation; unlimited position Hydraulic system: 110 main oil cylinder + 95 lifting cylinder, 4-ton reel Leg type: front V and rear H; span 4500/4000mm Control mode: electro-hydraulic proportional + dual control interlock; platform/ground dual operation Emergency device: electric hydraulic pump; emergency stop + fault rescue Anti-fall design: double anti-retraction device for cylinder/outrigger; anti-overturning of arm/vehicle Options: Hydraulic tool interface as standard; supports hydraulic wrenches and other tools Boom function: hydraulic boom (luffing + slewing); auxiliary lifting equipment

FAQ

Q1: How to verify the insulation performance?

A1: The insulation arm has been tested by a third-party agency and complies with the GB/T 18857-2020 standard. A test report is provided and regular re-inspection is required (recommended once a year).

Q2: Can it operate in rainy and foggy weather?

A2: The insulation bucket can be operated in light rain/fog (protected by a waterproof cover), but the operation must be stopped in heavy rain/strong wind.

Q3: How long does the emergency electric pump last?

A3: The standard battery supports continuous operation for ≥15 minutes under full load, meeting the requirements for safe landing.

Q4: Is a special operation license required?

A4: The operator must hold a high-altitude operation license (such as: GB/T 3608-2008 standard), and the vehicle must apply for an engineering machinery license.

After-Sales Service Policy

Warranty period: 1 year or 2000 hours for the whole vehicle (whichever comes first)
Emergency response: On-site support within 24 hours from national service outlets (municipalities/provincial capitals)
Training service: Free operator safety training (2 people/unit)
Accessories supply: Sufficient original accessories are available, and they can be shipped within 72 hours
Regular inspections: 2 free full vehicle safety inspections in the first year